Auto Extreme

The air intake cleaning kits and parts helps increase airflow, throttle response, acceleration and fuel efficiency. Performance Intake Kits can increase horsepower, torque and acceleration.

K&N® Recharger Filter Care Kits: 6-step maintenance system makes air filter perform like new. Includes 6-1/2 oz. spray oil, 12-oz. filter cleaner and service decal. Restores maximum airflow efficiency of replacement Filtercharger® air filters.

Injen Hydro Shield Pre-Filters: Race proven durable polyester has uniform micron openings to filter debris .005″ or larger. Factory treated using an embedded hydrophobic process to maximize water repellency and ensure most consistent airflow. Consistent, dependable airflow. Water repellent outer coating. Look great and fit snugly.

AFE Restore Kits: Cleaner is specifically formulated to release dirt without harming the microfibers critical to efficient filtration. Specifically designed to work with AFE filters. AFE’s highly refined oil is proven less likely to foul MAF sensors than other oil.

APC™ Intimidator™ Air Breathers: Adds color to engine while reducing the carbon buildup on throttle plate that can impair throttle response. 9mm neck. For any vehicle.

Volant Filter Recharge Kits: Specially created to ensure that your Volant air filter and intake system are performing at their peak levels. While protecting and enhancing your engine’s performance, the Volant Air Filter traps gobs of dust, dirt and debris. 12 oz. aerosol spray can of cleaning solution is specially formulated, so it won’t damage the filter medium. 12.3 oz. aerosol can of performance oil is a breeze to apply and features a blue tinted dye, so it’s easy to see where the oil has saturated the filter. Kit will typically yield 3 thorough cleanings or about 150,000 miles of top-performance filtration.

K&N® Air Filter Wrap: These filter wraps work to prolong the life of your K&N FilterCharger when used in extremely dusty conditions. The durable polyester material contains uniform micron openings that stop all dirt debris .005 or larger, yet airflow is not restricted. This pre-filter will also prevent splashes of water or mud from saturating your K&N air filter. Please be aware this material is water repellent, not water proof. These may be cleaned with soap and water.

Foam Filter Cleaning Kits: Cleaning your foam filter is quick and easy! Remove the filter element from the engine and shake off any loose dirt or dust. Spray the filter element with cleaning solution inside and out. Let filter stand for 3 minutes. Rinse with plain water. A second application may be necessary for heavily soiled filters. Let dry and then re-oil before reinstalling filter. When oiling filter, hold can 12″ away from filter and spray both inner and outer surfaces thoroughly. Let stand for 5 minutes before massaging oil into foam. Repeat process if necessary to ensure 100% coverage. Kit includes cleaning solvent and oil reconditioner. Keep your foam filter working at maximum potential. Specially formulated. Complete with cleaning solvent and oil reconditioner.

DORMAN® Air Intake Hoses: Cracked or worn air intake hoses allow unmetered air into the engine. Our air intake hoses help prevent engine stall outs, rough idling, poor gas mileage and sluggish acceleration. Keeps dirt and debris out of your engine — covers the most failure-prone models. Direct OE replacement.

WYSCO Hilborn Style Air Scoops: Adds a custom touch while drawing in more cool air. Includes adapter plate for use with both single and dual 4-bbl. carburetors. Easy to install. Mirror polished lightweight aluminum.

AEM Air Bypass Valves: Eliminates the unlikely chance of water ingestion should the filter element become wet from deep puddles, rain, hail, sleet, snow or any other scenario in which the filter element could encounter or become submerged in water. The valve installs along the upper portion of the inlet pipe on the same axis as the throttle body centerline. Should a drop in pressure occur within the pipe, the valve shuts down induction at the filter and routes incoming air through the valve’s external orifices, eliminating any chance of water ingestion. Available in three sizes to fit every AEM intake diameter. Manufactured and assembled in the USA. Protects against water ingestion. Crafted from mineral-reinforced nylon — never corrodes.

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.