Tips and Guide on How to Clean Automotive Air Filter Properly

Here are the cleaning instructions and guide on cleaning the automotive air filter. To maintain the quality performance of your car or automotive, air filter must be cleaned regularly and also it will prevent building up of dust and clogging the cabin vents. It’s also important to remember how clean the air-filters properly so they won’t be ruined.

First of all, be careful in removing the air filter from the car to not spread the dust buildup in it and to be able to clean it more easily. Place it carefully on the floor, then spray your cleaner on both sides of the filter. The K & N Air Filter Cleaner comes in a kit already so if it’s your first time clean your air filter, you won’t have a problem about what to use and how. After you’ve sprayed both sides with the air filter cleaner, leave it for about 10 minutes so the filter can absorb the cleaner and for it to loosen the dirt on the cleaner. However, don’t let it dry in the cleaner.

After 10 minutes, rinse the cleaner off the automotive air-filter. It’s recommended to use a cool water and a low-pressure one. If you’re using a hose, flush the water from the clean side of the air-filter up and down until all traces of dirt and cleaner are gone. If there are still portions of dirt visible in any part of the filter, you can repeat the process of cleaning.

After rinsing the air filter and making sure there aren’t traces of either cleaner or dirt in it, tap it gently to remove the excess water then let it dry naturally. It’s important to make sure that it’s completely dry before proceeding to the next step. When the filter is already completely dry, it’s time to oil it. Remember to apply the oil only on the dirty side of the filter. The K & N Air Filter Cleaner comes in two containers, the spray bottle and the squeeze bottle. If you’re using the squeeze bottle apply the oil along the crest of the pleats. If you’re using a spray bottle, make sure you spray an equal amount along the pleats of the air filter. Leave it for 20 minutes, and make sure that the color is even on the entire dirty side of the filter.

Before putting back the automotive air-filter, do a last inspection about the color of the filter and if there are any damages present. If everything looks right, follow the installation instructions that came with the kit when you bought your automotive air filter.

Article Source: http://EzineArticles.com/?expert=Erika_Ayala

K&N® Generation II Fuel Injection Performance Kits: K&N® high-flow element and components replace restrictive factory air filter. Virtually unrestricted airflow — 26% more airflow than stock. Maximum performance — more power, greater efficiency, increased torque and improved throttle response. Superior filtering for consistent horsepower gains in all conditions. Real world tests on a Grand Cherokee produced consistent 26.3 hp gains at rear wheels. Exclusive million mile warranty.

WR Secret Weapon Air Intake Systems: Creates 2 different paths of airflow, both flowing at different air speeds. When the 2 air paths meet, they create a vacuum, multiplying the air speed and forcing more air into the engine at a higher rate, creating MORE HORSEPOWER. CNC mandrel-bent 6061 aluminum tubing is hand tig welded in sections to ensure a constant balance in airflow, regulation of airspeed, positive seal and proper fit. System is carefully tuned. Incorporates a CAD-designed and flow-bench-tested turbo velocity stack that dramatically increases airflow, air speed and air mass into the engine to increase engine performance. Performance that exceeds any cold air intake or short ram.

AIRAID® Performance Intake Systems With Synthaflow Filter: Synthaflow filters utilize multiple layers of cotton gauze with a layer of synthetic fiber material that traps the smallest dirt particles, plus a durable epoxy-coated wire mesh specially designed to provide optimum balance between maximum air flow, peak filtration, and filter rigidity. Improves airflow up to 20% over stock. High-flow reusable 5-layer cotton/durable epoxy-coated wire mesh superior air filter. Up to 18 horsepower gains without any other modifications. Mandrel-bent large-diameter tubing is powder coated inside and out.

Spectre Performance™ Custom Air Intake Systems: Spectre Performance Air Intake Kits are engineered to increase horsepower, torque and improve fuel economy. A powder-coated steel heat shield and custom-formed polished aluminum intake tube provide enchanced performance as well as trick appearance. High-flow washable, re-useable cotton filter is included, backed by a 10-year/100,000 mile warranty. All necessary brackets, couplers, clamps and adapters are included to make for an easy installation. Complete 4″ diameter polished aluminum intake. Powder-coated steel heat shield protects air filter. Improves air flow for more horsepower, torque; better fuel economy. An easy drop-in upgrade that includes high-performance air filter.

AEM Brute Force Intake Systems with New Dryflow Synthetic Filter: A revolution in filtration technology! Designed to outperform all other systems, producing more torque and more horsepower! Intakes are CNC mandrel-bent 6061 aluminum with TIG-welded fittings and brackets for maximum durability. Dyno tested for maximum torque and horsepower at a full and partial throttle to ensure the maximum power at every throttle angle across the RPM band. Integrated velocity stack increases structural rigidity to filter neck and improves airflow. Better than the best cotton gauze filters for superior filtration and dust trapping capabilities. Amazing 99.4% filtration — as small as 1 micron. No oil required, so no power nor filter degradation from cleaning. Strong, lightweight urethane cage prevents filter damage.

Volant Performance Cool Air Intake Kits: Volant’s new innovative design is revolutionizing the way true cold air systems are made! X-link polyethylene construction will not conduct heat and gives great flow performance. Completely seals off the engine compartment form the air being used by the engine. Superior molded X-link polyethylene gives fast, smooth air flow and avoids conducting heat to air inside. Increases performance up to 18 horsepower, adds 40 lbs. of torque and even saves gas mileage. Dyno proven to maintain gain even in hot weather. Straight-forward installation — no hassles. Kit pulls cold air from outside your engine compartment with a completely sealed box. Superior filtering with the highest flow available on the market.

Airaid® Jr. Air Intake Systems: The Airaid® Jr. is a combination of our washable and reusable Premium Direct-Fit Replacement Filter and Modular Intake Tube (M.I.T.). Nicknamed the “Dynamic Duo of Airflow”, these entry-level systems will give your vehicle performance increases at an economical price. Provides more airflow to the engine to improve throttle response while boosting horsepower and torque. Gain more horsepower and improve gas mileage inexpensively! Replaces restrictive factory air filter and intake tube and improves throttle response and performance. Easy installation.

Injen® Speed Pro Cold Air Intake Systems with Mr Technology: Precision designed for best fit and maximum performance. Everything, including the dimensions and pleats of the velocity filter, is engineered for power and performance. Made of 6061 T-6 aluminum alloy and high temperature composite materials. Includes CNC machined adapter, stainless-steel badging, silicone vacuum hoses, reinforced couplers/straight hoses and stainless steel clamps. Innovative tri-step function ensures highest power gains within safe factory air/fuel ratios. All feature Injen patented MR technology — dyno-proven performance with Injen’s all-wheel-drive DynoJet.

Street and Performance Airmax Spiral-Flow Intake Systems: Superior intake system increases performance for your SUV, Jeep® or truck! Experience power gains, increased torque and improved fuel economy. Oversized inlet tube with rifled barrel spiral sleeve insert creates increased air volume and cooler air temperatures than your stock induction system. Mandrel-formed tubing and hand-rolled heat shield made from 16-gauge, powder coat steel. Includes washable high-flow air filter.

Roush® Cold Air Intake Kits: The V-8 system boasts a 4″ roto-molded intake tube, larger than any other intake on the market that is mated to a lightweight composite Cool Air Dam. Increase horsepower and torque with this Cold Air Intake System. Lifetime High Flow filter element can be cleaned and re-oiled. Easy installation with no drilling or cutting required.

Predator™ Airfury™ Cold Air Induction Maximizers: The safe and easy way to improve your engine’s performance, fuel economy and increase its lifespan! Increase the turbo life as well! Even get up to 80 degrees lower EGTs! Provides a tunnel type effect directly into the factory air intake allowing up to an additional 100 cubic feet of air per second at 65 mph into the air box. Great alternative to replacing complete intake system while still gaining efficiencies. Smoother running engine for smoother vehicle operation—colder air means denser air and that means more oxygen to your engine’s combustion chamber for better engine performance. Install this maximizer kit behind your grill in just 10 minutes. Specifically designed pleated filter captures fine dirt particles and other potentially harmful contaminants without losing efficiency.

K&N® Recharger Filter Care Kits: 6-step maintenance system makes air filter perform like new. Includes 6-1/2 oz. spray oil, 12-oz. filter cleaner and service decal. Restores maximum airflow efficiency of replacement Filtercharger® air filters.

Injen Hydro Shield Pre-Filters: Race proven durable polyester has uniform micron openings to filter debris .005″ or larger. Factory treated using an embedded hydrophobic process to maximize water repellency and ensure most consistent airflow. Consistent, dependable airflow. Water repellent outer coating. Look great and fit snugly.

AFE Restore Kits: Cleaner is specifically formulated to release dirt without harming the microfibers critical to efficient filtration. Specifically designed to work with AFE filters. AFE’s highly refined oil is proven less likely to foul MAF sensors than other oil.

APC™ Intimidator™ Air Breathers: Adds color to engine while reducing the carbon buildup on throttle plate that can impair throttle response. 9mm neck. For any vehicle.

Volant Filter Recharge Kits: Specially created to ensure that your Volant air filter and intake system are performing at their peak levels. While protecting and enhancing your engine’s performance, the Volant Air Filter traps gobs of dust, dirt and debris. 12 oz. aerosol spray can of cleaning solution is specially formulated, so it won’t damage the filter medium. 12.3 oz. aerosol can of performance oil is a breeze to apply and features a blue tinted dye, so it’s easy to see where the oil has saturated the filter. Kit will typically yield 3 thorough cleanings or about 150,000 miles of top-performance filtration.

K&N® Air Filter Wrap: These filter wraps work to prolong the life of your K&N FilterCharger when used in extremely dusty conditions. The durable polyester material contains uniform micron openings that stop all dirt debris .005 or larger, yet airflow is not restricted. This pre-filter will also prevent splashes of water or mud from saturating your K&N air filter. Please be aware this material is water repellent, not water proof. These may be cleaned with soap and water.

Foam Filter Cleaning Kits: Cleaning your foam filter is quick and easy! Remove the filter element from the engine and shake off any loose dirt or dust. Spray the filter element with cleaning solution inside and out. Let filter stand for 3 minutes. Rinse with plain water. A second application may be necessary for heavily soiled filters. Let dry and then re-oil before reinstalling filter. When oiling filter, hold can 12″ away from filter and spray both inner and outer surfaces thoroughly. Let stand for 5 minutes before massaging oil into foam. Repeat process if necessary to ensure 100% coverage. Kit includes cleaning solvent and oil reconditioner. Keep your foam filter working at maximum potential. Specially formulated. Complete with cleaning solvent and oil reconditioner.

DORMAN® Air Intake Hoses: Cracked or worn air intake hoses allow unmetered air into the engine. Our air intake hoses help prevent engine stall outs, rough idling, poor gas mileage and sluggish acceleration. Keeps dirt and debris out of your engine — covers the most failure-prone models. Direct OE replacement.

WYSCO Hilborn Style Air Scoops: Adds a custom touch while drawing in more cool air. Includes adapter plate for use with both single and dual 4-bbl. carburetors. Easy to install. Mirror polished lightweight aluminum.

AEM Air Bypass Valves: Eliminates the unlikely chance of water ingestion should the filter element become wet from deep puddles, rain, hail, sleet, snow or any other scenario in which the filter element could encounter or become submerged in water. The valve installs along the upper portion of the inlet pipe on the same axis as the throttle body centerline. Should a drop in pressure occur within the pipe, the valve shuts down induction at the filter and routes incoming air through the valve’s external orifices, eliminating any chance of water ingestion. Available in three sizes to fit every AEM intake diameter. Manufactured and assembled in the USA. Protects against water ingestion. Crafted from mineral-reinforced nylon — never corrodes.

Granatelli Motorsports Performance Mass Airflow Sensors: OBD II Compatible. Works great with factory electronics and aftermarket chips or programmers. Innovative sensor features a state-of-the-art active-electronic module that provides improved control of both ignition and injector timing, contributing to the big horsepower gain at the rear wheels. 47% more airflow capacity than stock sensors. Sensor is housed in a high-impact injection-molded body to reduce heat “soak”, a problem common to stock metal sensor. Installation of this sensor will not affect mileage or drivability under normal conditions. Easy to install in minutes. Instructions included. 10 to 15 horsepower increase at rear wheels. OBD II Compatible.

Jet Performance Products™ Powr-Flo Mass Air Sensors: Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage from your vehicle by simply replacing the restrictive stock mass air sensor. Get a Mass Airflow Sensor and fight those rising gas prices. Compatible with most stock and vehicle modifications including: performance tuning, exhaust modifications, cold air intakes and ignition system upgrades. Redirects airflow to the intake plenum. Provides increased low-end torque. Easily installs in 10 minutes or less. One-year warranty. Increase horsepower and improve performance. Provide airflow increase of up to 45%. Compatible with other engine modifications.

Python Injection® Auxiliary Air Valves: Stabilizes engine performance and helps prevent rough running and high fuel consumption caused by a faulty auxiliary air valve. Re-manufactured to meet or exceed OE specifications.

Python Injection® Airflow Meters: Tested to preset intake vacuum ranges (simulate different on-car performance levels) to ensure flawless operation. Re-manufactured to quality standards.

Granatelli Micro-Tech Hi-Performance Mass Air Flow Sensors With Adjustable Calibration: Easy to install. OE style housing. Re-designed circuit board. Molded plastic construction. Up to 30% higher airflow rate than OE unit. Adjustable calibration. Custom tuned for modified engines.

Omix® Map Sensors: MAP (manifold absolute pressure) sensors are very crucial to engine performance. These sensors will respond to changes in manifold pressures and relay the information to the ECU (electronic control unit) in the form of voltage signal.

Omix® Intake Temperature Sensors: The intake air temperature sensor indicates to the computer, the temperature of the incoming air. Cold air being denser than warm air, more fuel would be required to achieve the ideal air/fuel ratio. The computer opens the injectors for a longer period of time to achieve this ideal ratio. Quickly and accurately detects the temperature.