Auto Extreme

If you want to add style and convenience to your car or vehicle, here are a variety of quality bumper accessories that can easily be installed. Collection of bumper accessories from leading brands such as Pacer, Bore, Bestop®, Performance Accessory™, Garage Pro™, Omix Ada® and Dee Engineering.

Crown Automotive JEEP® Wrangler Bumper Ends: Wrangler bumper ends come with a 12-month/12000-mile warranty (limited to material and workmanship and does not cover vehicle accidents). High impact ABS plastic construction. Meets or exceeds OE specifications. Easy bolt-on installation. Top quality replacement for your Wrangler.

Bob’s Antique Bumper Bolts - 4 piece set: The set consists of 4 bolts and nuts enough to re-mount most bumpers. These bumper bolt sets provide you with that great finishing touch when replacing or restoring an old bumper. Each bolt is made out of rust-resistant galvanized steel with a polished stainless steel cap. Each bolt has a standard 1-1/2″L carriage bolt with 7/16″ thread for most American cars & trucks.

Highrock 4×4™ D Ring Shakle Set: Ultra strong shackle is a must have for any bumper with 3/4″ diameter mounting tabs. Ideal for attaching recovery straps together off your vehicle.

Rampage Bumper Lighting Kits: Available in projector, driving and fog styles. 4″ lights for use with front and rear recovery bumpers sold separately. Include relay wiring and switch.

OMIX ADA® Bumper End Caps for JEEP®: Add a stylish and contemporary look to the front of your ‘87-’95 Wrangler. Black molded high-impact ABS plastic. Easy to install — no drilling required.

Turn Signal Assemblies for VOLKSWAGEN®: Turn signal assembly for Cal-look bumper includes a pair of pre-wired turn signals made of corrosion-resistant plastic. For replacement and Cal-look bumpers on ‘68-’73 Volkswagen® Beetles and Super Beetles.

West Coast Metric Bumper Grommets for VOLKSWAGEN®: For replacement and Cal-look bumpers on ‘68-’73 Volkswagen® Beetles and Super Beetles. Grommets are made of black rubber. These bumper grommets can be used on brackets — both front and rear of the car.

Crown Automotive “D”-Rings: “D”-rings come with a 1500 lbs. strength capacity and a 3/4″ thick bolt. Can be used with all bumpers.

EMPI Plates of Origin: Includes bracket for an easy bolt-on installation. Similar to plates used in Europe to show other motorists what country you hailed from. The final touch when restoring your pre-’67 Volkswagen® sedans or convertibles. Choice of a white background with black “D” for Deutschland and black stripe or a white background with bold “EMPI” global logo in black.

CARR Light Wings: Comes with 2″ predrilled holes to add lights. Has a limited lifetime warranty. Wings are available in polished aluminum, black, titanium, or chrome-plated finish. Wing swept design contours with vehicle 36″ wide wingspan. Offers the user sufficient area to mount the license plate.

Wrangler 180 Auxiliary Light Bars: These bars are used as a bumper under the rider providing protection from the steering box. Auxiliary bars come with a 1-1/2″ x .065″ wall round steel tubing. The auxiliary bar is designed to accommodate fog lamps, jacks and other off-road gear. The bar fits perfectly into the pre-existing mounting holes on the Wrangler. Easy bolt-on installation — no drilling required.

Dee Engineering Dune Buggy Skid Plates: Skid plates are 23-1/2″W and are made of 14″-gauge steel. Plates mount easily to the engine case and chassis pan. Heater boxes may require some modification. Includes hardware. Attaches to the rear bumper. Fits all Volkswagen® powered vehicles. Protects the entire underside of the engine from damage during off-road driving.

BESTOP® Highrock 4×4™ Bumper Box: Locking bumper box mounts directly to the Highrock 4×4™ front or rear bumper (rear mounting requires bracket ZX348427). May also be used as a step providing strong holding power up to 200-lbs. Made of 1/8″ thick steel with side pop outs to store your Hi-Lift Jack (not included). Special black powder coat finish over E Coat layer provides superior resistance to rust and corrosion. Includes instructions and mounting hardware. Note: For Highrock 4×4™ bumpers only but can also be mounted to a standard 2″ receiver using bumper box bracket (ZX348427) for use with oversized tire carriers. Mounts to Bestop® Highrock 4×4™ front or rear bumper or standard 2″ receiver for extra storage space. Indispensable storage unit for tools and winch recovery items. Features an angled design for greater off road clearance. Bolt on installation takes just minutes.

Replacement Crossmember and Bumper Parts: Replaces original perfectly. Made of heavy gauge, die-stamped steel. Precision hole placement for easy installation.

Performance ACCESSORIES™ Bolt Plate Adapters for JEEP®: For swing-away tire carriers.

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.