Auto Extreme

Quality and durable performance air intake kits and systems that increase airflow, throttle response, acceleration and fuel efficiency. Performance Intake Kits can increase horsepower, torque and acceleration.

K&N® Generation II Fuel Injection Performance Kits: K&N® high-flow element and components replace restrictive factory air filter. Virtually unrestricted airflow — 26% more airflow than stock. Maximum performance — more power, greater efficiency, increased torque and improved throttle response. Superior filtering for consistent horsepower gains in all conditions. Real world tests on a Grand Cherokee produced consistent 26.3 hp gains at rear wheels. Exclusive million mile warranty.

WR Secret Weapon Air Intake Systems: Creates 2 different paths of airflow, both flowing at different air speeds. When the 2 air paths meet, they create a vacuum, multiplying the air speed and forcing more air into the engine at a higher rate, creating MORE HORSEPOWER. CNC mandrel-bent 6061 aluminum tubing is hand tig welded in sections to ensure a constant balance in airflow, regulation of airspeed, positive seal and proper fit. System is carefully tuned. Incorporates a CAD-designed and flow-bench-tested turbo velocity stack that dramatically increases airflow, air speed and air mass into the engine to increase engine performance. Performance that exceeds any cold air intake or short ram.

AIRAID® Performance Intake Systems With Synthaflow Filter: Synthaflow filters utilize multiple layers of cotton gauze with a layer of synthetic fiber material that traps the smallest dirt particles, plus a durable epoxy-coated wire mesh specially designed to provide optimum balance between maximum air flow, peak filtration, and filter rigidity. Improves airflow up to 20% over stock. High-flow reusable 5-layer cotton/durable epoxy-coated wire mesh superior air filter. Up to 18 horsepower gains without any other modifications. Mandrel-bent large-diameter tubing is powder coated inside and out.

Spectre Performance™ Custom Air Intake Systems: Spectre Performance Air Intake Kits are engineered to increase horsepower, torque and improve fuel economy. A powder-coated steel heat shield and custom-formed polished aluminum intake tube provide enchanced performance as well as trick appearance. High-flow washable, re-useable cotton filter is included, backed by a 10-year/100,000 mile warranty. All necessary brackets, couplers, clamps and adapters are included to make for an easy installation. Complete 4″ diameter polished aluminum intake. Powder-coated steel heat shield protects air filter. Improves air flow for more horsepower, torque; better fuel economy. An easy drop-in upgrade that includes high-performance air filter.

AEM Brute Force Intake Systems with New Dryflow Synthetic Filter: A revolution in filtration technology! Designed to outperform all other systems, producing more torque and more horsepower! Intakes are CNC mandrel-bent 6061 aluminum with TIG-welded fittings and brackets for maximum durability. Dyno tested for maximum torque and horsepower at a full and partial throttle to ensure the maximum power at every throttle angle across the RPM band. Integrated velocity stack increases structural rigidity to filter neck and improves airflow. Better than the best cotton gauze filters for superior filtration and dust trapping capabilities. Amazing 99.4% filtration — as small as 1 micron. No oil required, so no power nor filter degradation from cleaning. Strong, lightweight urethane cage prevents filter damage.

Volant Performance Cool Air Intake Kits: Volant’s new innovative design is revolutionizing the way true cold air systems are made! X-link polyethylene construction will not conduct heat and gives great flow performance. Completely seals off the engine compartment form the air being used by the engine. Superior molded X-link polyethylene gives fast, smooth air flow and avoids conducting heat to air inside. Increases performance up to 18 horsepower, adds 40 lbs. of torque and even saves gas mileage. Dyno proven to maintain gain even in hot weather. Straight-forward installation — no hassles. Kit pulls cold air from outside your engine compartment with a completely sealed box. Superior filtering with the highest flow available on the market.

Airaid® Jr. Air Intake Systems: The Airaid® Jr. is a combination of our washable and reusable Premium Direct-Fit Replacement Filter and Modular Intake Tube (M.I.T.). Nicknamed the “Dynamic Duo of Airflow”, these entry-level systems will give your vehicle performance increases at an economical price. Provides more airflow to the engine to improve throttle response while boosting horsepower and torque. Gain more horsepower and improve gas mileage inexpensively! Replaces restrictive factory air filter and intake tube and improves throttle response and performance. Easy installation.

Injen® Speed Pro Cold Air Intake Systems with Mr Technology: Precision designed for best fit and maximum performance. Everything, including the dimensions and pleats of the velocity filter, is engineered for power and performance. Made of 6061 T-6 aluminum alloy and high temperature composite materials. Includes CNC machined adapter, stainless-steel badging, silicone vacuum hoses, reinforced couplers/straight hoses and stainless steel clamps. Innovative tri-step function ensures highest power gains within safe factory air/fuel ratios. All feature Injen patented MR technology — dyno-proven performance with Injen’s all-wheel-drive DynoJet.

Street and Performance Airmax Spiral-Flow Intake Systems: Superior intake system increases performance for your SUV, Jeep® or truck! Experience power gains, increased torque and improved fuel economy. Oversized inlet tube with rifled barrel spiral sleeve insert creates increased air volume and cooler air temperatures than your stock induction system. Mandrel-formed tubing and hand-rolled heat shield made from 16-gauge, powder coat steel. Includes washable high-flow air filter.

Roush® Cold Air Intake Kits: The V-8 system boasts a 4″ roto-molded intake tube, larger than any other intake on the market that is mated to a lightweight composite Cool Air Dam. Increase horsepower and torque with this Cold Air Intake System. Lifetime High Flow filter element can be cleaned and re-oiled. Easy installation with no drilling or cutting required.

Predator™ Airfury™ Cold Air Induction Maximizers: The safe and easy way to improve your engine’s performance, fuel economy and increase its lifespan! Increase the turbo life as well! Even get up to 80 degrees lower EGTs! Provides a tunnel type effect directly into the factory air intake allowing up to an additional 100 cubic feet of air per second at 65 mph into the air box. Great alternative to replacing complete intake system while still gaining efficiencies. Smoother running engine for smoother vehicle operation—colder air means denser air and that means more oxygen to your engine’s combustion chamber for better engine performance. Install this maximizer kit behind your grill in just 10 minutes. Specifically designed pleated filter captures fine dirt particles and other potentially harmful contaminants without losing efficiency.

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.